• Phone:+86-15881333573
  • E-mail:xytrcarbide@zgxymj.com
  • ADD:No. 1 B2 Road, Zigong City, Sichuan Province,China
HOT PRODUCTS
  • Tungsten Carbide Bushings

  • Tungsten Carbide Wear Parts

  • Tungsten Carbide Ball

  • Tungsten Carbide Bushings

  • Tungsten Carbide Wear Parts

  • Tungsten Carbide Ball

Tungsten Carbide Cold Heading Dies

Tungsten Carbide Cold Heading Dies

Tungsten Carbide Cold Heading Dies

Introduction:


In standard parts industry, tungsten carbide cold heading dies need to under great unit pressure in cold upsetting deformation process , when a large degree of deformation and material hardness, units of pressure up to 2000MPa more. At the same time the metal flow intense, thus requiring tungsten carbide cold heading dies have high strength, good fatigue resistance, high hardness and good fatigue resistance, in order to ensure the cold heading dies under high pressure without breaking, deformation and wear resistance.Tungsten carbide cold heading die raw material is produced by powder metallurgy composite materials, which have high hardness, wear resistance,life is several times and several hundred times than ordinary cold heading die. With carbide manufacturing standard tungsten carbide cold heading die, not only have high dimensional accuracy of parts, but also greatly improve the life of the cold heading die, can create good economic and social benefits.

Carbide is made of rare and very fine particles of refractory carbide (WC) and metallic cobalt as a binder composition. Due to the special method for producing such alloys remains the original characteristics of the tungsten carbide, its hardness close to diamond, and because of cobalt as a binder, it also has the toughness. Tungsten carbide cold heading dies material has the following characteristics:

1. High wear resistance. Tungsten carbide cold heading dies material high wear resistance, tensile modulus can be guaranteed long-term work in any degree of deformation, ensuring standard size unchanged.

2. Excellent in polishing. Carbide has a good polishing, can be processed into the die hole mirror light, ensuring high quality standard surface.

3. Adhesion to metal is small. In the tungsten carbide cold heading process, ferrous metal material adhesion small carbide tooling materials, ensuring a high tungsten carbide cold heading die life.

4. The friction coefficient and energy consumption is small.

5. High thermal conductivity. Since the thermal conductivity of the tungsten carbide die is high, heat generated during the cold forging can quickly conducted away to improve the durability of the mold.

6. Good corrosion resistance.

Grade List 

 

Grade ISO Code Chemical Composition(%) Physical Mechanical Properties (≥) Application
WC Co Density g/cm3 Hardness(HRA) T.R.S N/mm2
YG3 K01 97 3 14.90 91.00 1180 Suitable for finishing of cast iron,non-ferrous metals,alloys and non-metallic materials,and semi-finishing vehicles for intermittent cutting.
YG6 K10 94 6 15.10 92.00 1420 Finishing of chilled hard alloy cast iron and heat resistant alloy steel and ordinary cast iron.
YG6X K20 94 6 15.10 91.00 1600 Cast iron, non-ferrous metals and alloys, non-metallic materials, medium to cutting, semi-finishing and finishing.
YG8 K20-K30 92 8 14.90 90.00 1600 Suitable for casting of cast iron, non-ferrous metals and their alloys and non-metallic materials, roughing of sections and rough cutting.
YG10 K40 90 10 14.70 89.00 1900 Suitable for the production of drawing dies, wear parts and stamping parts and cores for hard alloy automatic presses.
YG10X K40 89 10 14.70 89.50 2200 Suitable for small diameter micro drills, end mills, rotary boring tools, etc.
YG15 K30 85 15 14.70 87.00 2100 Forging, perforating and stamping tools for steel bars and steel tubes with high compression ratios and working under large stresses.
YG20 K30 80 20 13.70 85.50 2500 Stamping die, stamping watch parts, musical instrument spring piece.
YG20C K40 80 20 13.70 82.00 2200 punching battery case, toothpaste skin mold, small size steel ball, screw, nut stamping die, hot rolling twist drill bit plate.
YG30 G60 70 30 12.80 82.00 2750 Production of standard parts, bearings, tools and other industries for cold heading, cold punching, cold pressing die.

 

Zigong Xingyu Technicarbide

Copyright © www.carbure-tungstene.com All rights reserved.

Contact us

  • Phone:+86-15881333573
  • E-mail:xytrcarbide@zgxymj.com
  • ADD:No. 1 B2 Road, Zigong City, Sichuan Province,China